Studying For Solar Courses

It is by using natural resources such as tidal or wind energy – collectively known as ‘Green Energy’ – that we could meet our daily energy needs. They’re all considered naturally able to replenish – and thereby ‘Green’. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. Generally, this is the result of using up to date ideas, specifically those that are planet friendly and eco-efficient.

In the home environment, one can see examples such as Solar Thermal and Solar Water Heating Collectors. To gain electricity from roof panels you would need solar electrical panels (PV’s). Following on from this is a process known as Biomass Energy – which includes Boilers burning wood and other fuels. We now also have Ground Source Heat Pumps – which draw out the heat left by the Sun. Finally, we have two of the most traditional forms of energy generation that have gone through some resurgence over the last few years; these being Wind Power, Wind Turbines and Hydropower (including Water Wheels.)

Solar Energy Systems: Also known as Solar Energy, this mainly uses two, albeit different types of solar panels to get the desired results. Initially, there is the process of obtaining hot water from the Sun via Solar Water Heating Collectors. Furthermore, there are the Solar Electrical Panels (more correctly known as Photovoltaic heat collectors) which transform solar radiation into electricity. Obviously situated away from blockages such as chimneys etc., these Solar Panels need to be mounted on south facing roofs at an angle of 30 degrees from the horizontal.

In the UK, Solar Water Power is now one of the most sought after forms of Solar Energy. With the ability to provide almost half the annual need for hot water in the house, Solar Water heating systems are very important. The cost of fitting depends on whether you do it yourself (500 to 1500 pounds) or whether you get a professional fitter – in which case it will cost between 2-5k overall.

Biomass Energy Based Systems: Historically, this has come from plants and animals, though nowadays this also includes new genetcially engineered ‘energy crops’. Considering its ability to produce energy in the form of heat and electricity, this type of energy is extremely flexible. Furthermore, within the European Markets, the UK is one of the central producers of Biomass fuels. Considering all this, and the relative lack of C02 produced, makes the whole process highly green overall. Much of the UK wood crop is sustainable, in order to ensure that C02 produced during any heating process is absorbed.

‘Energy Crops’ trees such as Willow and Poplar play a major part in the process – under the banner of Short Rotation Coppice (SRC). Of equal importance is the production of perennial grasses – because of their yield of dry matter. Whilst Agricultural and Municipal waste may be lesser known, they are essential to the whole process. One natural offshoot of agricultural work is Agricultural Waste. Municipal Waste such as food or wood can also be utilised as a biomass product.

Systems Based On Geo-Thermal Energy: Used in the generation of both warm water and electricity, this energy mainly comes from the Sun and heats the Earth. Using the ground temperature of around 12 degrees in the UK – we can both heat and cool buildings. Generally, items such as Heat Pumps are thought of as very effective, as they produce four units of energy for every one that is used for generation. A greate return of energy (sometimes almost 100 percent) is produced – because heat source pumps can operate in-line with wind turbines and solar electrical panels.

Systems Based On Wind Energy: When you consider the milling of grain and pumping of water, it is easy to see how long wind energy has been with us. Whether to your home or to a local grid, when the energy has been generated it must be delivered to a point of usage – and cannot be stored. In fact, the UK has the largest wind resource within Europe. Although we only utilise 1 percent of the current electricity capability from wind – we do have the ability to create 10 percent. Overall, electricity could be generated from as low as 2p per kWh – instead of the current 2-10 p per kWh. Because of this, it is estimated that it takes between half a year to three quarters of a year to cover the installation costs.

Within the UK, Hydropower suits the energy generation model. Just like a thousand years ago, we are utilising the energy from water. Interestingly enough, this type of energy production meets around 2 percent of the UK electrical total demand.

The Hydropower process uses a turbine that can convert the energy from one form into another. The important thing is that, without having to rely on water storage, the turbines can generate electricity. It is by using the eroded national distribution systems, that allows for outdated sluices and dams to be used by techniques known as ‘Micro-Hydro’. This smaller form of electrical output has been recently reviewed and could allocate some 200MW of capacity to the UK system. The capital cost of installing a micro-hydro system can run between 200 and 3000 pounds per kW of energy output.

‘Green Energy’ is growing – mainly due to the demands of the Western World. That said, the UK is well placed – especially in the domestic sector – to take full advantage of the items above.

It is the drive for installations in the domestic sector that looks to favour jobs such as plumbers and electricians. With EEC and UK recognition of renewable energy getting ever-higher on the political agenda, the grants and financial aid for introduction of these systems can only increase. Gaining installation certification across these areas can only provide further opportunity and job security to anyone already in related fields or looking to retrain. To that end, it may be worth thinking about combined training. You can then get plumbing or electrical training along with green knowledge.